久盛工業股份有限公司 Johnson Chemical Products Co., Ltd

Specification &Natural table

Specification

General Use Oil Seal（CPL General Curing）
Physical properties	Units	GS-593
Hardness	Shore A	93 ±2
Tensile strength	N / mm²	41.4
Elongation at break	％	520
50％Tensile modulus	N / mm²	8.4
100％Tensile modulus	N / mm²	10
300％Tensile modulus	N / mm²	24.1
Tear strength（Die C）	N / mm	98
Abrasion loss	mm³	32
Compression set at room temperature x 70 hrs	％	17
Compression set at 70^oC x 22 hrs	％	31
Compression set at 100^oC x 24 hrs	％	72
Rebound resilience	％	42
Temperature range	^oC	- 40 / 95
Vicat softening temperatur（1Kg）	^oC	130

High Performing Use Oil Seal（HQEE Curing）
Physical properties	Units	HS-593Q
Hardness	Shore A	93 ±2
Tensile strength	N / mm²	55
Elongation at break	％	520
50％Tensile modulus	N / mm²	9.2
100％Tensile modulus	N / mm²	11.5
300％Tensile modulus	N / mm²	24.2
Tear strength（Die C）	N / mm	100
Abrasion loss	mm³	28
Compression set at room temperature x 70 hrs	％
Compression set at 70^oC x 22 hrs	％	25
Compression set at 100^oC x 24 hrs	％	33
Rebound resilience	％	44
Temperature range	^oC	- 40 / 108
Vicat softening temperatur（1Kg）	^oC	175

Size (in mm) of the Small Section of Small to Medium Seals ( UHS Type )
UHS	ID.	OD.	H
11.2	11.2	19.2	5
14	14	22	5
16	16	24	5
18	18	26	5
20	20	28	5
22.4	22.4	30	5
23.5	23.5	31.5	5
25	25	33	5
28	28	35.5	5
30	30	40	6
31.5	31.5	41.5	6
35	35	45	6
35.5	35.5	45	6
38	38	48	6
40	40	50	6
45A	45A	56	6
45	45	56	7
50	50	60	6
53	53	63	6
55	55	65	6
56	56	66	6
58	58	68	6
60A	60A	70	6
60	60	71	7
63	63	73	6
65	65	75	6
67	67	77	6
70	70	80	6
71	71	80	6
75	75	85	6
80	80	90	6
85	85	100	9
90	90	105	9
95	95	110	9
98	98	112	9
100	100	115	9
112	112	125	9
125	125	140	9
136	136	150	9
140	140	155	9
145	145	160	9
150	150	165	9
155	155	170	9
160	160	175	9
165	165	180	9
170	170	185	9
175	175	190	9
180	180	200	12
185	185	205	12
190	190	210	12
195	195	215	12
200	200	220	12

Size (in mm) of the Large Section of Small to Medium Seals ( DH Type )
DH	ID.	OD.	H1/H2
11.2	11.2	19.2	4.5/6
14	14	22	4.5/6
16	16	24	4.5/6
18	18	26	4.5/6
20	20	28	4.5/6
22.4	22.4	30.4	4.5/6
23.5	23.5	31.5	4.5/6
25	25	33	4.5/6
28	28	36	4.5/6
30	30	38	5/6.5
31.5	31.5	39.5	5/6.5
32	32	40	5/6.5
35	35	43	5/6.5
35.5	35.5	43.5	5/6.5
38	38	46	5/6.5
40	40	48	5/6.5
45	45	53	5/6.5
50	50	58	5/6.5
53	53	61	5/6.5
55	55	63	5/6.5
56	56	64	5/6.5
60	60	68	5/6.5
63	63	71	5/6.5
65	65	73	5/6.5
67	67	75	5/6.5
70	70	80	6/8.0
71	71	81	6/8.0
75	75	85	6/8.0
80	80	90	6/8.0
85	85	95	6/8.0
90	90	100	6/8.0
98	98	108	6/8.0
100	100	110	6/8.0
112	112	122	6/8.0
125	125	138	7/9.5
136	120	149	7/9.5
140	140	153	7/9.5
145	145	158	7/9.5
160	160	174	7/9.5

Size (in mm) of the Large Section of Small to Medium Seals ( UNS Type )
UNS	ID.	OD.	H
6.3	6.3	16.3	8
7.1	7.1	17.1	8
8	8	18	8
9	9	19	8
10	10	20	8
11.2	11.2	21.2	8
12.5	12.5	22.5	8
14	14	24	8
15	15	25	8
16	16	26	8
18	18	28	8
20	20	30	8
22.4	22.4	32.4	8
25	25	35	8
28	28	43	10
30	30	45	10
31.5	31.5	46.5	10
32	32	47	10
35	35	50	10
35.5	35.5	50.5	10
40	40	55	10
45	45	60	10
48	48	63	10
50	50	65	10
53	53	73	12
55	55	75	12
56	56	76	12
60	60	80	12
63	63	83	12
65	65	85	12
67	67	87	12
70	70	90	12
71	71	91	12
75	75	95	12
80	80	100	12
85	85	105	12
90	90	110	12
95	95	115	12
100	100	120	12
105	105	125	15
106	106	126	15
110	110	130	15
112	112	132	15
118	118	138	15
120	120	140	15
125	125	145	15
130	130	150	15
140	140	160	15
150	150	170	15

PU HOLLOW BAR FOR HYDRAULIC SEAL

Copyright © Johnson Chemical Products Co., Ltd